How to Use IPv4 Test
- Open the IPv4 Test tool.
- Click the "Run IPv4 Test" button.
- Wait a few seconds while the connection is tested.
- View your IPv4 address and connectivity status.
IPv4 Test – Check Your IPv4 Connectivity
Test your IPv4 connection online and check whether your device or network has working IPv4 connectivity.
IPv4
IPv4 Connectivity Test
Check whether your current connection supports IPv4.
IPv4 Status
Ready to Test
Click the button below to test your IPv4 connectivity.
IPv4 Address
—
Connectivity
—
Protocol
IPv4
Test Type
IPv4-only connection
Note:
A failed IPv4 test does not necessarily mean your internet is completely offline.
IPv4 connectivity could not be detected.
HOW TO USE
IPv4 Test
Use this free IPv4 test to check whether your current internet connection supports IPv4. The tool connects to an IPv4-only service and detects whether IPv4 connectivity is available.
IPv4 stands for Internet Protocol version 4. It is one of the main protocols used to connect devices and services across the internet.
What Does This IPv4 Test Check?
- IPv4 connectivity
- Your public IPv4 address
- Whether your network can reach an IPv4-only service
- Basic IPv4 connection status
What Is IPv4?
IPv4 is the fourth version of the Internet Protocol. IPv4 addresses use 32-bit addressing and are normally written as four decimal numbers separated by dots, such as 192.0.2.1.
IPv4 vs IPv6
IPv4 uses 32-bit addresses, while IPv6 uses 128-bit addresses. IPv6 was developed partly because the available IPv4 address space is limited.
Why Test IPv4?
An IPv4 test can help troubleshoot network connectivity and determine whether your ISP, router, device, or current network has working IPv4 access.
What Does IPv4 Not Available Mean?
If the test cannot connect through IPv4, your current network may have an IPv4 connectivity problem or may be using a network configuration where IPv4 access is unavailable.
Is This IPv4 Test Free?
Yes. This online IPv4 connectivity test is free to use and does not require software installation.
FAQ
Frequently Asked Questions
What is an IPv4 test?
An IPv4 test checks whether your current internet connection can communicate over IPv4 and detects your public IPv4 address when available.
How do I know if I have IPv4?
Run this test. If an IPv4 address is detected and the IPv4-only connection succeeds, your network has working IPv4 connectivity.
What does an IPv4 address look like?
An IPv4 address contains four decimal numbers separated by dots, for example 203.0.113.10.
Is IPv4 faster than IPv6?
Neither protocol is automatically faster. Actual performance depends on your ISP, routing, server, network and connection conditions.
Can IPv4 and IPv6 work together?
Yes. Many networks use dual-stack connectivity, allowing devices to use both IPv4 and IPv6.
Why is my IPv4 test failing?
The failure may be caused by network configuration, ISP restrictions, router settings, connectivity problems or the current network environment.
Is this IPv4 test free?
Yes. You can use this online IPv4 test for free.
RELATED TOOLS
More Tools
Upload Speed Test
Test your real internet upload speed online by uploading test data and measuring your connection performance in Mbps.
Use Tool →IP Address Lookup – Find Your Public IP & Location
Look up a public IP address and view its IP version, ISP, ASN, organization, country, region and approximate city information.
Use Tool →UDP Port Checker Check UDP Port Reachability Online
Test UDP port reachability online with a real server-side UDP diagnostic. Check whether the target UDP service responds to a network request.
Use Tool →TCP Port Checker – Check Open Ports Online
Check whether a TCP port is reachable on a hostname or IP address using a real server-side TCP connection test.
Use Tool →DNS Leak Test – Powerful Free DNS Leak Checker Online
Run a free DNS leak test online and compare DNS resolution through multiple secure DNS resolvers. Check whether your configured DNS service responds consistently.
Use Tool →WebRTC Leak Test – Check IP Address Leaks Online
Check whether your browser's WebRTC connection exposes IP addresses. Run a free real-time WebRTC leak test without installing software.
Use Tool →